good resistance to chloride induced tensile corrosion
| DIN | Alloy | UNS | AISI | AFNOR | B.S. | Registered work's label |
|---|---|---|---|---|---|---|
| 2.4816 | alloy 600 | N 06600 | Ni15Fe | NA 14 | Incoloy®600 Nicrofer®7216 |
- usable in oxidising substances, if forming a passivating oxide coating
- performs especially well under reducing conditions
- resistant to intercrystalline corrosion
- resistance to intercristalline corrosion up to 0.2"
- durch Titanzusatz Verbesserung der interkristallinen Korrosion,aber Verschlechterung der Zerspanbarkeit
- against crevice corrosion
- good resistance to intercrystalline corrosion
- good against chloride induced tensile corrosion
- good resistance to tensile corrosion
- Good overall corrosion resistance
- good resistance to intercristalline corrosion to ca. 572° F (ca 300°C)
- good resistance even in carbonising/chlorinating/oxidising substances
- high resistance to corrosion in oxidising and chloric substances
- high resistance to pitting corrosion, tensile corrosion, crevice corrosion
- high corrosion resistance
- high resistance to pitting corrosion in oxidising and reducing substances
- non-corroding
- stainless
- satisfactionary against pitting corrosion
- +++#1:bis ca. 400°C
- +++#1:durch Molybdänzusatz
- +++#1:(nicht im geschweißtem Zustand)
- +++#1:< 400°C
- +++#2: bis 5mm
- +++#:<350°C
- +++<= 50mm
Liability exclusion
All aforementioned specifications serve as a general orientation and have to be reviewed depending on the conditions of use.(c) 2012 M. Woite GmbH, Postbox, D-40671 Erkrath | Phone +49 (211) 24 40 91 - Fax +49 (211) 24 92 28 | www.m-woite.com - woite@woite-edelstahl.com