resistant to intercrystalline corrosion
DIN | Alloy | UNS | AISI | AFNOR | B.S. | Registered work's label |
---|---|---|---|---|---|---|
1.4306 | S 30403 | AISI 304L | Z3CN19-11 | 304S11 | ||
1.4307 | S 30403 | AISI 304L | Z3CN19-09 | 304S11 | ||
1.4404 | S 31603 | AISI 316 L | X2CrNiMo17-12-2 / NF EN 10028-7 (01/2000) (FR) | X2CrNiMo17-12-2 / B.S.EN 10028-7 (01-2000 ) (GB) | V4a Supra NK | |
1.4435 | S 31603 | AISI 316L | NF EN 10297-12(12-2005) | B.S EN 10288-1 (06/2005) | Supra® | |
1.4439 | Alloy 317 LN | S 31726 | X2CrNiMoN17-13-5 / NF E.N 10088-1(06-2005) (FR) | X2CrNiMoN17-13-5 / B.S. E.N 10088-1(06-2005) (GB) | ||
1.4462 | S 31803 | AISI 316 LN | X2CrNiMoN 22-5-3 / NF EN 10088-5 (03/2009) (FR) | X2CrNiMoN 22-5-3 / B.S EN 10088-5 (03/2009) (GB) | *Cronifer® 2205 LCN Duplex Cr 22 (Spec) | |
1.4465 | S 31050 | Cronifer 2525 LCN | ||||
1.4501 | S 32760 | X2CrNiMoWCuWN 25-7-4 / NF EN 10088-2 (06/2005) (FR) | X2CrNiMoWCuWN 25-7-4 /B.S. EN 10088-2 (06/2005) (GB | Zeron 100 | ||
1.4539 | alloy 904 L | N 08904 | X1NiCrMoCu 25 20 5 / NF EN 10088-1 ( 06/2005) (FR) | X1NiCrMoCu 25 20 5 /BS EN 10088-1 ( 06/2005) (GB) | ||
1.4541 | S 32100 | AISI 321 | X6CrNiTi18-10 / NF EN10088-5 ( 03/2009) (FR) | X6CrNiTi18-10 / EN 10088-1 ( 06/2005) (GB) | ||
1.4542 | S 17400 | AISI 630 | X5CrNiCuNb16-4 EN 10088-1(02/2005) (FR) | X5CrNiCuNb16-4-EN 10088-1(02/2005) | ||
1.4547 | S 31254 | X1CrNiMoCuN20-18-7 / NF EN 10217-7 (02/2005) (FR) | X1CrNiMoCuN20-18-7 / B.S.EN 10217-7 (02/2005) (GB) | 254 SMO® | ||
1.4562 | Alloy 31 | N 08031 | Nocrofer® 3127 hMo | |||
1.4563 | alloy 28 | N 08028 | X1NiCrMoCu31-27-4 / (EN 10088-1(062005) (F) | X1NiCrMoCu31-27-4 / (EN 10088-1(062005) (GB) | Nicrofer® 3127 LC Sanicro 28 (Spec) | |
1.4565 | Alloy 24 | S 34565 | X2CrNiMnMoN25-18-6-5 / NF EN 10088-1(05/2005) (FR) | X2CrNiMnMoN25-18-6-5 / B.S EN 10088-1(05/2005) (GB) | NIROSTA®(R) 4565 S alloy 24 | |
1.4571 | S 31635 | AISI 316 Ti | X6CrNiMoTi 17-12-2 / NF EN 10088-1 ( 06/2005) (FR) | X6CrNiMoTi 17-12-2 /B.S. EN 10088-1 ( 06/2005) (GB) | Cronifer 1810Ti | |
2.4856 | alloy 625 | N 06625 | NC 22DNb | Inconel® 625 |
- usable in oxidising substances, if forming a passivating oxide coating
- performs especially well under reducing conditions
- resistance to intercristalline corrosion up to 0.2"
- durch Titanzusatz Verbesserung der interkristallinen Korrosion,aber Verschlechterung der Zerspanbarkeit
- against crevice corrosion
- good resistance to intercrystalline corrosion
- good against chloride induced tensile corrosion
- good resistance to chloride induced tensile corrosion
- good resistance to tensile corrosion
- Good overall corrosion resistance
- good resistance to intercristalline corrosion to ca. 572° F (ca 300°C)
- good resistance even in carbonising/chlorinating/oxidising substances
- high resistance to corrosion in oxidising and chloric substances
- high resistance to pitting corrosion, tensile corrosion, crevice corrosion
- high corrosion resistance
- high resistance to pitting corrosion in oxidising and reducing substances
- non-corroding
- stainless
- satisfactionary against pitting corrosion
- +++#1:bis ca. 400°C
- +++#1:durch Molybdänzusatz
- +++#1:(nicht im geschweißtem Zustand)
- +++#1:< 400°C
- +++#2: bis 5mm
- +++#:<350°C
- +++<= 50mm
Liability exclusion
All aforementioned specifications serve as a general orientation and have to be reviewed depending on the conditions of use.(c) 2012 M. Woite GmbH, Postbox, D-40671 Erkrath | Phone +49 (211) 24 40 91 - Fax +49 (211) 24 92 28 | www.m-woite.com - woite@woite-edelstahl.com