Welding information
Please select a welding information category you are interested in ...- pre-heat to 392°F if material width >0.4"
- when using covered rod electrodes, mind the low C and Si content
- Beim Schweißen unter Gas kein wasserstoff-oder stickstoffhaltiges Gas verwenden
- ???
- preheating not required
- avoid gas welding
- gezielte Wärmeführung
- generally no heat treatment necessary after welding process
- special post heat treating not required
- use material in soft-annealed state
- Material im weichgeglühtem Zustand vorliegen
- material is heat-sensitive , requires low heat input
- material has to be normalized or tempered
- normal weldability
- Vorwärm- und Arbeitstemperatur max.200°C
- pre-heat 302°F
- pre-heat 212°F (>10mm)
- pre-heat 662°F
- no heat treatment necessary before or after welding process
- material is weldable in all widths using aforementioned techniques
- interpass temperature must not go over 302°F
- Zwischenlagetemperatur max 120°C