Material No.: S 30403
Description
EN symbol (short) | X2CrNi19-11 | Material No. | 1.4306 |
---|
AISI | AISI 304L |
---|
AFNOR | Z3CN19-11 |
---|
BS | 304S11 |
---|
| Density lb/in.3 | 7,9 |
---|
Hardness (HB) | |
---|
Composition | chromium nickel steel |
---|
Category | Stainless steels steel, resistant to rust and acids |
---|
Structure | austenitic |
---|
Corrosion | resistant to intercrystalline corrosion high corrosion resistance |
---|
|
Chemical Composition
| C | Si | Mn | P | S | Cr | N | Ni |
---|
S 30403 | Min % | | | | | | 18,00 | | 10,00 |
---|
Max % | 0,035 | 0,75 | 2,oo | 0,040 | 0,030 | 20,00 | | 13,00 |
---|
ASTM A 213 S 30403 |
1.4306 AISI 304L | Min % | | | | | | 18,00 | | 10,00 |
---|
Max % | 0,035 | 0,75 | 2,oo | 0,040 | 0,030 | 20,00 | | 13,00 |
---|
ASTM A 213 AISI 304L |
Physical properties
Property | Value |
---|
Density: lb/in.3 | 7,9 |
---|
Hardness: (HB) | --- |
---|
Permeabilität bei 20°C | B 90 |
---|
Mechanical properties (20°C / 68°F)
Dehngrenze | 25 (110) | TP 304L (ATM A 249) |
---|
Dehngrenze | |
---|
Zugfestigkeit | 70 /(485) | TP 304L (ATM A 249) |
---|
Bruchdehnung | 35 | in 2 in.or 50mm | TP 304L (ATM A 249) |
---|
Schlagarbeit ISO-V | |
---|
(Mittelwert von 3 Proben) | |
---|
Temparature information
Application area |
---|
Operation temperature | -454 ºF to 662 ºF | (in strain situation III (to -454°F) |
---|
Solution heat treatment |
---|
Working temperature | 1832 ºF to 2012 ºF |
---|
Explanation report | cool down:water,air |
---|
Solution heat treatment |
---|
Working temperature | 1562 ºF to 2102 ºF |
---|
Explanation report | cool down:air |
---|
Standards / information
Standards | Desciption |
---|
ASTM A 213 | Standard Specification for
Seamless Ferritic and Austenitic Alloy-Steel Boiler,Superheater,and Heat-Exchanger Tubes |
ASTM A 240 | sheet metal and ribbons from stainless Cr and Ni pressure containers |
ASTM A 249 | Standard Specification for
Welded austenitic steel boiler, Superheaters, heat-exchangers,and condenser Tubes |
ASTM A 269 | Standard Specification for
Seamless and welded, austenic, and stainless steel tubing for general purposes |
ASTM A 312 | Standard Specification for
Seamless and welded austenitic stainless steel pipes |
ASTM A 403 | Standard Specification for
Wrought Austenitic Stainless Steel Piping Fittings |
DIN 10216-5 (11/2004+B1) | Seamless steel pipes under compression load
Pipes made from stainless steel |
DIN 17740 | |
DIN EN 10028-1 (09/2005) | flat products made from steel for pressure tanks
Part 1 General requirements |
DIN EN 10028-2 (09/2009) | flat products made from steel for pressure tanks
non-alloy and alloy steels with set properties in high temperatures |
DIN EN 10028-7 | |
DIN EN 10028-7 (02/2008) | flat products made from steel for pressure tanks Part 7: Stainless steel |
DIN EN 10088-1 (09/2005) | Stainless steels
Part 1: List of stainless steels |
DIN EN 10088-3 (09/2005) | stainless steels.Technical delivery conditions for semi-finished products,bars,rods,wire selection and bright products of corrosion resisting steels for general and construction purposes |
DIN EN 10216-5 (11/2004+B1) | Seamless steel tubes under compression load Stainless steel tubes |
DIN EN 10217-7 | Welded steel pipes under compression load
Pipes made from stainless steel |
DIN EN 10296-2 (02/2006) | welded circular steel pipes for machine construction and general technical applications, stainless steel |
DIN EN 10296-2 (02/2006) | Welded circular steel pipes for machine construction and general technical service
stainless steel |
DIN EN 10297-2 (02/2006) | Welded circular steel pipes for machine construction and general technical service
stainless steel. Pipes made from stainless steel |
SEW 310 (08/1992) | physical properties of steel |
Process information
Welding |
---|
- Material classification acc. CEN ISO/TR 15608 | 8.2 |
---|
- Type | well weldable |
---|
- Add. material | 1.4316;1.4551 |
---|
- Hints | no heat treatment necessary before or after welding process |
---|
Main fields of application
Details of application | |
---|
Certifications | |
---|
Kunststoffindustrie | |
---|
Geräte der Nahrungsmittelindustrie | |
---|
Range of products
Product type | Product |
---|
Plates / Sheets | plates/sheets plate/sheet cuts |
Fittings | welded elbows welded reductions Welded T-pieces seamless elbows seamless reductions seamless T-pieces Other Fittings a.o. Weldolets, Nipples |
Flanges / Collars / Flared tube ends | various flanges (weld neck flange,blind flange etc.) |
Bumped boiler ends / caps / round blanks | from sheets |
Pipes / Tubes | welded pipes/tubes seamless pipes/tubes |
Bar steel | round bar steel |
Liability exclusion
All aforementioned specifications serve as a general orientation and have to be reviewed depending on the conditions of use.
(c) 2012 M. Woite GmbH, Postbox, D-40671 Erkrath | Phone +49 (211) 24 40 91 - Fax +49 (211) 24 92 28 | www.m-woite.com - woite@woite-edelstahl.com