Material No.: alloy 201
Description
|
| ||||||||||||||||||||||
|
Chemical Composition
C | Mn | S | Si | Fe | Ni | Cu | Mg | Ti | ||
---|---|---|---|---|---|---|---|---|---|---|
alloy 201 | Min % | 99,00 | ||||||||
Max % | 0,02 | 0,35 | 0,010 | 0,35 | 0,40 | 0,25 | ||||
ASTM B 161 | ||||||||||
2.4068 | Min % | 99,020 | ||||||||
Max % | 0,02 | 0,35 | 0,01 | 0,25 | 0,40 | 0,25 | 0,150 | 0,10 | ||
(Key to Steel 2010) | ||||||||||
N 02201 | Min % | 99,00 | ||||||||
Max % | 0,02 | 0,35 | 0,010 | 0,35 | 0,40 | 0,25 | ||||
ASTM B 161 |
Physical properties
Property | Value |
---|---|
Density: kg/dm3 | 8,9 |
Hardness: HB | 95 |
Permeability at 20°C/68°F | --- |
Temperature T °C/F (°C/F) | Specific heat J / kgK (Btu / lb °F) | Thermal conductivity W/mK (Btu·in / ft2·h·°F) | Electric resistance µΩ · cm (Ω circ mill / ft) | Modulus of elasticity kN/mm2 (103 ksi) | Expansion rate from 70°F bis T 10-6 / K (10-6 / °F) |
---|---|---|---|---|---|
-200°C | 150 | 93 | 2 | 227 | 10,1 |
0°C | 426 | 81 | 8,5 | 207 | |
20°C | 456 | 79 | 9 | 205 | |
100°C | 475 | 73 | 13 | 200 | 13,3 |
300°C | 570 | 60 | 26 | 190 | 14,3 |
400°C | 530 | 57 | 33 | 182 | 14,8 |
500°C | 525 | 58,5 | 37 | 175 | 15,2 |
600°C | 535 | 61 | 40 | 165 | 15,6 |
800°C | 565 | 65,5 | 45 | 140 | 16,2 |
Mechanical properties (20°C / 68°F)
0,2%Yield strength Mpa/ksi | 241 / 35 | ||
---|---|---|---|
Tensile strength MPA /ksi | 414 / 60 | ||
elongation % | 50 | ||
Impact energy ISO-V | |||
(average value of 3 samples) | |||
good magnetic properties good electric conductivity | |||
Remarks |
Temparature information
Application area | ||
---|---|---|
Operation temperature | -459 ºF to 1292 ºF |
Solution heat treatment | ||
---|---|---|
Working temperature | 1292 ºF to 1562 ºF | |
Explanation report | air cooling |
low-strain annealing | ||
---|---|---|
Working temperature | 1022 ºF to 1202 ºF |
Solution heat treatment | ||
---|---|---|
Working temperature | 1472 ºF to 2282 ºF |
Standards / information
Standards | Desciption |
---|---|
ASTM B 160 | Standard Specification for Nickel Rods and Bars |
ASTM B 161 | Standard Specification for Nickel Seamless Pipes and Tubes |
ASTM B 163 | Standard Specifications for seamless nickel and nickel alloy condensers and heat-exchanger tubes |
ASTM B 366 | Standard Specification for Factory-Made Wrought nickel and nickel alloy fittings |
ASTM B 725 | Standard Specification for Welded Nickel and Nickel Cooper Alloy Pipe |
DIN 17740 (09/2002) | nickel in wrought material |
DIN 17751 (2002/09) | tubes out of nickel with nickel-wrought alloy properties |
DIN 17753 (2002/09) | wire out of nickel with nickel-wrought alloy properties |
Process information
Welding | |
---|---|
- Material classification acc. CEN ISO/TR 15608 | 41 |
- Type | welds very good |
Main fields of application
Details of application | production of caustic soda (caustic soda evaporators up to 450°C/842°F, chlorine, hydrogen chloride, food processing, production of soaps and cleaning agents |
---|---|
Certifications | It pressured container regulation up to 1112°F |
Druckbehälter | bis ca. 600°C |
Natron-Eindampfer | bis ca300°C |
Chemical Industry | Anlagen zur Herstellung von Natronlauge,Chlor,Chlorwasserstoff |
food processing industry | für Fettsäuren,Fruchtsäfte/ fatty acids and fruit juice |
production of detergents | Waschmittel- und Seifenherstellung/ detergent and soap production |
Elektrolyseanlagen | zur Salzherstellung/ salt production |
Range of products
Product type | Product |
---|---|
Plates / Sheets | plates/sheets plate/sheet cuts |
Rotating components | fittings from barsteel |
Fittings | welded elbows welded reductions Welded T-pieces seamless elbows seamless reductions seamless T-pieces |
Flanges / Collars / Flared tube ends | flared tube end collars various flanges (weld neck flange,blind flange etc.) |
Pipes / Tubes | welded pipes/tubes welded square pipes/tubes seamless pipes/tubes |
Bar steel | flat steel round bar steel hexagon steel |
Liability exclusion
All aforementioned specifications serve as a general orientation and have to be reviewed depending on the conditions of use.(c) 2012 M. Woite GmbH, Postbox, D-40671 Erkrath | Phone +49 (211) 24 40 91 - Fax +49 (211) 24 92 28 | www.m-woite.com - woite@woite-edelstahl.com