Material No.: AISI 630
Description
|
|
Chemical Composition
C | Si | Mn | P | S | Cr | Mo | Ni | Cu | Nb | 5,00 | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|
AISI 630 | Min % | |||||||||||
Max % | ||||||||||||
1.4542 | Min % | 15,00 | 3,00 | |||||||||
Max % | 0,07 | 0,70 | 1,50 | 0,040 | 0,015 | 17,00 | 0,60 | 3,00 | 5,00 | (5xC)<=0,70 | ||
(Key to steel 2010) |
Physical properties
Property | Value |
---|---|
Density: kg/dm3 | 7,8 |
Hardness: (HB) | 170 |
magnetizable | yes |
Temperature T °C/F (°C/F) | Specific heat J / kgK (Btu / lb °F) | Thermal conductivity W/mK (Btu·in / ft2·h·°F) | Electric resistance µΩ · cm (Ω circ mill / ft) | Modulus of elasticity kN/mm2 (103 ksi) | Expansion rate from 70°F bis T 10-6 / K (10-6 / °F) |
---|---|---|---|---|---|
20 / 68 | 0,50 | 16 | 0,71 | 200 | |
100 / | 10,9 | ||||
300 / | 11,1 |
Mechanical properties (20°C / 68°F)
1% Yield stress | |||
---|---|---|---|
Tensile strenght Rm (MPA) | 1070-1250 | ||
Elongation A5 (%) | >=10 | ||
E-Modul (KN/mm2) | 200 |
Temparature information
Application area | ||
---|---|---|
Operation temperature | ºF to 842 ºF | ??? |
Solution heat treatment | ||
---|---|---|
Working temperature | 1868 ºF to 1922 ºF | |
Explanation report | Refroidissement: Uile,air |
Working temperature | 1886 ºF to 1922 ºF | |
---|---|---|
Processing informations | cool down:air (2-3 Min.) |
Solution heat treatment | ||
---|---|---|
Working temperature | 2102 ºF to 1652 ºF | |
Explanation report | Refroidissement: Four,Air |
Standards / information
Standards | Desciption |
---|---|
DIN EN 10028-1 (09/2005) | flat products made from steel for pressure tanks Part 1 General requirements |
DIN EN 10028-2 (09/2009) | flat products made from steel for pressure tanks non-alloy and alloy steels with set properties in high temperatures |
Process information
Cold forming | ??? |
---|
Chip removing process | ??? |
---|
Welding | |
---|---|
- Type | WIG manual arc welding No translation! |
Main fields of application
Details of application | |
---|---|
Certifications | |
Verdichterbau | |
crude oil | |
Paper and pulp industry | |
Nasskorrosionshinweise |
Range of products
Product type | Product |
---|---|
Plates / Sheets | plates/sheets plate/sheet cuts |
Fittings | welded elbows welded reductions Welded T-pieces seamless elbows seamless reductions seamless T-pieces |
Flanges / Collars / Flared tube ends | weld neck flange/blind flange |
Bumped boiler ends / caps / round blanks | from bar steel |
Pipes / Tubes | welded pipes/tubes seamless pipes/tubes |
Bar steel | section steel |
Liability exclusion
All aforementioned specifications serve as a general orientation and have to be reviewed depending on the conditions of use.(c) 2012 M. Woite GmbH, Postbox, D-40671 Erkrath | Phone +49 (211) 24 40 91 - Fax +49 (211) 24 92 28 | www.m-woite.com - woite@woite-edelstahl.com