Material No.: 1.6368
Description
EN symbol (short) | 15iCuMoNb5-6-4 | AFNOR | 15NiCuMoNb5-6-4 / NF EN 10028(06/2009) (FR) |
---|
BS | 15NiCuMoNb5-6-4/ B.S EN 10028(06/2009) (GB) |
---|
| Density kg/dm3 | 7,85 |
---|
Hardness (HB) | 175-220 |
---|
Composition | Alloyed stainless steel |
---|
Category | Heat resistant construction steel |
---|
Structure | |
---|
|
Chemical Composition
| C | Si | Mn | P | S | Al | Cr | Cu | Mo | N | Nb | Ni |
---|
1.6368 | Min % | | 0,25 | 0,80 | | | | | 0,50 | 0,25 | | 0,015 | 1,00 |
---|
Max % | 0,17 | 0,50 | 1,20 | 0,025 | 0,020 | 0,0500 | 0,30 | 0,80 | 0,50 | 0,020 | 0,045 | 1,30 |
---|
(Key to steel 2010) |
Physical properties
Property | Value |
---|
Density: kg/dm3 | 7,85 |
---|
Hardness: (HB) | 175-220 |
---|
Temp. | Creep strain limit | Creep strain limit | Creep rupture strength | Creep rupture strength | Creep rupture strength |
---|
°C / °F | 10.000 h | 100.000 h | 10.000 h | 100.000 h | |
---|
°C / °F | Rp0,2 / Mpa /ksi | Rp1,0 / Mpa /ksi | Mpa /ksi | Mpa /ksi | | 400/ 752 | 324 / 46,9 | 294 / 42,6 | 402 / 58,3 | 373 / 54,0 | |
450 / 842 | 265 / 38,4 | 206 / 29,8 | 304 / 44,0 | 245 / 35,5 | |
500 / 932 | 108 / 15,6 | 49 / 7,1 | 147 / 21,3 | 69 / 10,0 | |
ksi value calculated |
Mechanical properties (20°C / 68°F)
tensile elastic limit (Re) Mpa/ksi | >=405 / 58,7 | lengthwise |
---|
Tensile strength Rm Mpa/ksi | 610-780/88,4-113,1 |
---|
Elongation A5 % | >=19/>=17 | lengthwise/transverse |
---|
impact work ISO-V (J) | >=41 | lengthwise/transverse |
---|
Temparature information
Application area |
---|
Operation temperature | 14 ºF to 932 ºF |
---|
Normalising |
---|
Working temperature | 1616 ºF to 1760 ºF |
---|
Explanation report | cooldown:air |
---|
Solution heat treatment |
---|
Working temperature | 1562 ºF to 2012 ºF |
---|
Hardening |
---|
Working temperature | 1616 ºF to 1760 ºF |
---|
Tempering |
---|
Working temperature | 1076 ºF to 1256 ºF |
---|
Explanation report | cooldown:air |
---|
Stress relief annealing |
---|
Working temperature | ºF to 1085 ºF |
---|
Processing informations | >= 2h |
---|
Standards / information
Standards | Desciption |
---|
DIN 100216-2(10-/2007) | Seamless steel tubes for pressure purposes.Non-alloy and alloy steel tubes with specified elevated temperature properties |
DIN EN 10216-2(10/2007) | Stanless steel tubes for pressure purposes. Non-alloy and alloy steel tubes with specified elevated temperature properties |
SEW 310 (08/1992) | physical properties of steel |
Process information
Cold forming | can be formed when hot or cold |
---|
Welding |
---|
- Type | well weldable |
---|
Main fields of application
Details of application | |
---|
Certifications | AD 2000 data sheet W1-pressure containers -4°F-932°F |
---|
Steam boiler construction | pressure tanks |
---|
Range of products
Product type | Product |
---|
Plates / Sheets | plates/sheets plate/sheet cuts |
Fittings | welded elbows welded reductions Welded T-pieces seamless elbows seamless reductions seamless T-pieces |
Flanges / Collars / Flared tube ends | flared tube end collars various flanges (weld neck flange,blind flange etc.) weld neck flange/blind flange |
Bumped boiler ends / caps / round blanks | from sheets |
Pipes / Tubes | welded pipes/tubes seamless pipes/tubes |
Bar steel | flat steel section steel round bar steel |
Liability exclusion
All aforementioned specifications serve as a general orientation and have to be reviewed depending on the conditions of use.
(c) 2012 M. Woite GmbH, Postbox, D-40671 Erkrath | Phone +49 (211) 24 40 91 - Fax +49 (211) 24 92 28 | www.m-woite.com - woite@woite-edelstahl.com