Material No.: 1.4923
Description
|
|
Chemical Composition
C | Si | Mn | P | S | Cr | Mo | Ni | V | ||
---|---|---|---|---|---|---|---|---|---|---|
1.4923 | Min % | 0,18 | 0,40 | 11,00 | 0,80 | 0,30 | 0,25 | |||
Max % | 0,24 | 0,50 | 0,90 | 0,025 | 0,015 | 12,50 | 1,20 | 8,80 | 0,35 | |
(Key to steel 2010) |
Physical properties
Property | Value |
---|---|
Density: kg/dm3 | 7,7 |
Hardness: HV | 590 (max) |
Hardness HB30 | <=270 |
magnetizable | yes |
Temperature T °C/F (°C/F) | Specific heat J / kgK (Btu / lb °F) | Thermal conductivity W/mK (Btu·in / ft2·h·°F) | Electric resistance µΩ · cm (Ω circ mill / ft) | Modulus of elasticity kN/mm2 (103 ksi) | Expansion rate from 70°F bis T 10-6 / K (10-6 / °F) |
---|---|---|---|---|---|
20 / | 460 | 24 (--) | |||
650 | 29 (--) | ||||
800 | 540(--) |
Temp. | Creep strain limit | Creep strain limit | Creep rupture strength | Creep rupture strength | Creep rupture strength |
---|---|---|---|---|---|
°C/°F | 10 000h ( | 100 000h | 10 000h | 100 000h | (Rp1,0) N/mm2 | Rp1,0 (N/mm2) | (N/mm2) | (N/mm2) |
450 / 842 | 436 (--) | 373 (--) | 480 (--) | 432 (--) | |
500 /932 | 289 (--) | 221 (--) | 338 (--) | 276 (--) | |
550 / 1022 | 165 (--) | 108 (--) | 211 (--) | 137 (--) | |
600 /1112 | 79 (--) | 44 (--) | 103 (--) | 59 (--) | |
700 / 1292 | 25 (--) | 14 (--) | |||
800 / 1472 | 9 (--) |
Mechanical properties (20°C / 68°F)
Dehngrenze | |||
---|---|---|---|
Tensile strenght -N/mm2 /ksi | 800-950/116-137,7 | ||
Elongation (A5)-(%) | >=14 | ||
Schlagarbeit ISO-V |
Temparature information
Application area | ||
---|---|---|
Operation temperature | ºF to 1112 ºF | scaling resistance |
Working temperature | 1895 ºF to 1949 ºF | |
---|---|---|
Explanation report | water or oil |
Standards / information
Standards | Desciption |
---|---|
DIN EN 10088-1 (09/2005) | Stainless steels Part 1: List of stainless steels |
DIN EN 10302 | heat-resisting steel nickel-cobalt alloy |
Process information
Cold forming | conditionally possible |
---|
Chip removing process | mediocre |
---|
Welding | |
---|---|
- Type | well weldable manual arc protective gas WIG |
- Hints | pre-heat 662°F |
Main fields of application
Details of application | |
---|---|
Certifications | |
Chemische Industrie | |
Steam boiler construction | |
Turbinenbau | |
conduit construction |
Range of products
Product type | Product |
---|---|
Plates / Sheets | plates/sheets plate/sheet cuts |
Fittings | welded elbows welded reductions Welded T-pieces seamless elbows seamless reductions seamless T-pieces Other Fittings a.o. Weldolets, Nipples |
Flanges / Collars / Flared tube ends | flared tube end collars various flanges (weld neck flange,blind flange etc.) weld neck flange/blind flange |
Pipes / Tubes | welded pipes/tubes seamless pipes/tubes |
Bar steel | flat steel round bar steel |
Liability exclusion
All aforementioned specifications serve as a general orientation and have to be reviewed depending on the conditions of use.(c) 2012 M. Woite GmbH, Postbox, D-40671 Erkrath | Phone +49 (211) 24 40 91 - Fax +49 (211) 24 92 28 | www.m-woite.com - woite@woite-edelstahl.com