Material No.: 1.4876
Description
|
| ||||||||||||||||||||
|
Chemical Composition
C | Mn | P | S | Cr | Ni | Si | Al | Ti | Fe | Cu | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|
1.4876 | Min % | 19,00 | 30,00 | 0,15 | 0,15 | |||||||
Max % | 0,12 | 2,0 | 0,030 | 0,015 | 23,00 | 34,00 | 1,00 | 0,60 | 0,60 | |||
(Key to steel 2010) | ||||||||||||
alloy 800 | Min % | |||||||||||
Max % | ||||||||||||
N 08800 | Min % | 19,0 | 30,0 | 0,15 | 0,15 | 39,5 | ||||||
Max % | 0,10 | 1,50 | 0,015 | 23,0 | 35,0 | 1,0 | 0,60 | 0,60 | 0,75 | |||
ASTM B 407 (N 08800-Alloy 800) |
Physical properties
Property | Value |
---|---|
Density: lb//in3 | 0,287 |
Hardness: HB30 | <=192 |
permeability by 20°C | 1,01 |
magnetizable | no |
elasticity modulus (N/mm2) /ksi | 194 / 28,1 |
Temperature T °C/F (°C/F) | Specific heat J / kgK (Btu / lb °F) | Thermal conductivity W/mK (Btu·in / ft2·h·°F) | Electric resistance µΩ · cm (Ω circ mill / ft) | Modulus of elasticity kN/mm2 (103 ksi) | Expansion rate from 70°F bis T 10-6 / K (10-6 / °F) |
---|---|---|---|---|---|
20 / 68 | 472 (--) | 11,5 (--) | 101 (--) | 194 (--) | 12 (--) |
100 / 212 | 501 (--) | 13,1 (--) | 104 (--) | 189 (--) | 15,1 (--) |
200 / 392 | 525 (--) | 14,8 (--) | 108 (--) | 183 (--) | 15,7 (--) |
300 / 572 | 532 (--) | 16,4 (--) | 112 (--) | 177 (--) | 16,2 (--) |
400 / 752 | 555 (--) | 18,1 (--) | 115 (--) | 170 (--) | 16,6 (--) |
500 / 932 | 582 (--) | 19,6 (--) | 118 (--) | 163 (--) | 17,0 (--) |
600 / 1112 | 604 (--) | 21,2 (--) | 120 (--) | 156 (--) | 17,4 (--) |
800 /1472 | 609 (--) | 24,3 (--) | 124 (--) | 141 (--) | 18,0 (--) |
1000 / 1832 | 641 (--) | 27,3 (--) | 127 (--) | 127 (--) | 18,6 (--) |
Temp. | Creep strain limit | Creep strain limit | Creep rupture strength | Creep rupture strength | Creep rupture strength |
---|---|---|---|---|---|
1000 h | °C/°F | Mpa/ksi | |||
650 / 1202 | 165 / 23,9 | ||||
705 / 1300 | 105 / 15,2 | ||||
870 /1600 | 32 / 4,7 | ||||
980 /1800 | 14 / 2,0 |
Temperature | Yield strength in high temperatures | Yield strength in high temperatures | Tensile strenght in high temperatures |
---|---|---|---|
°C / °F | Rp 1,0 | Rp 0,2 | Rm | N/mm2 / ksi | N/mm2 /ksi | N/mm2 /ksi |
20 / 68 | 200 / 29 | 170 / 24,6 | 450 / 65,2 |
100 / 212 | 160 / 23,2 | 140 / 20,3 | 400 / 58,0 |
300 / 572 | 115 / 16,6 | 95 / 13,7 | 390 / 56,5 |
500 / 932 | 100 / 15,4 | 80 / 11,6 | 360 / 52,2 |
600 / 1112 | 95 / 13,7 | 75 / 10,9 | 300 / 43,5 |
ksi value calculated |
Mechanical properties (20°C / 68°F)
1 %Yield strength Rp 1,0 Mpa(ksi | 200 / 29 | ||
---|---|---|---|
tensile elastic limit (Mpa) /ksi | >=170 />=24,6 | ||
Tensile strenght Rm (Mpa) | 450-680 | ||
Elongation A5 (%) | >=30 >=35 | quer längs | |
impact work KV(ISO-V)/Jcm2 | >=150 >=100 | längs quer |
Temparature information
Application area | ||
---|---|---|
Operation temperature | ºF to 1112 ºF | air to 2012°F |
Explanation report | soft-annealed : resistant to scaling by air to 2012 °F |
Solution heat treatment | ||
---|---|---|
Working temperature | 1922 ºF to 2102 ºF | |
Explanation report | cooling down Water/air |
soft-annealed | ||
---|---|---|
Working temperature | 1688 ºF to 2552 ºF |
Solution heat treatment | ||
---|---|---|
Working temperature | 1832 ºF to 2282 ºF |
Standards / information
Standards | Desciption |
---|---|
ASTM A 312 | Standard Specification for Seamless and welded austenitic stainless steel pipes |
ASTM B 163 | Standard Specifications for seamless nickel and nickel alloy condensers and heat-exchanger tubes |
ASTM B 407 | Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube |
ASTM B 408 | Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar |
ASTM B 409 | Standard Specification for Nickel-Iron-Cromium Alloy metal sheets |
DIN EN 10088-1 (09/2005) | Stainless steels Part 1: List of stainless steels |
DIN EN 10095 (05/1999) | heat resistant steel and nickel alloy |
DIN EN 10216-2(10/2007) | Stanless steel tubes for pressure purposes. Non-alloy and alloy steel tubes with specified elevated temperature properties |
DIN EN 10297-2 (02/2006) | seamless circular steel pipes for machine construction and general technical applications, stainless steel |
SEW 310 (08/1992) | physical properties of steel |
SEW 470 (02/1976) | heat-resisting rolled and forged steels |
VdTÜV-Werkstoffblatt 412 | rolled/forged steel, X10NiCrAlTi 32-20, material-nr. 1.4876; sheet metal, ribbon, rod steel, forging, seamless pipe |
VdTÜV WBL-412 | rolled / forged steel material-nr.1.4876 (12/2009) |
Process information
Chip removing process | process in annealed state, due to cold work hardening low cutting speed keep constant cutting tool contact |
---|
Welding | |
---|---|
- Material classification acc. CEN ISO/TR 15608 | 8,2 |
- Type | well weldable all methods of welding |
- Add. material | 2.4806/2.4807 |
Main fields of application
Details of application | scaling resistant in air up to 2012°F corrosion and heat resistant |
---|---|
Certifications | Nace MR 01-75 |
Steam boiler construction | |
industral furnace engineering | |
Apparatus engineering | |
crude oil |
Range of products
Product type | Product |
---|---|
Plates / Sheets | plates/sheets plate/sheet cuts |
Fittings | welded elbows welded reductions Welded T-pieces seamless elbows seamless reductions seamless T-pieces |
Flanges / Collars / Flared tube ends | various flanges (weld neck flange,blind flange etc.) |
Pipes / Tubes | welded pipes/tubes seamless pipes/tubes |
Bar steel | flat steel round bar steel |
Liability exclusion
All aforementioned specifications serve as a general orientation and have to be reviewed depending on the conditions of use.(c) 2012 M. Woite GmbH, Postbox, D-40671 Erkrath | Phone +49 (211) 24 40 91 - Fax +49 (211) 24 92 28 | www.m-woite.com - woite@woite-edelstahl.com