Material No.: 1.4565
Description
|
|
Chemical Composition
| C | Mn | P | S | Cr | Mo | Si | Ni | N | Nb | Cb+Ti | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.4565 | Min % | 5,0 | 24,0 | 4,0 | 16,0 | 0,40 | ||||||
| Max % | 0,03 | 7,0 | 0,030 | 0,015 | 26,0 | 5,0 | 1,0 | 19,0 | 0,60 | 0,150 | ||
| (Key to steel 2010) SEW 400 deviations for MnCr;Mo | ||||||||||||
| Alloy 24 | Min % | |||||||||||
| Max % | ||||||||||||
| S 34565 | Min % | 5,00 | 23,0 | 4,0 | 16,0 | 0,40 | ||||||
| Max % | 0,03 | 7,00 | 0,030 | 0,010 | 25,0 | 5,0 | 1,00 | 18,0 | 0,60 | 0,10 | ||
| ASTM A312 (UNS S34565) | ||||||||||||
Physical properties
| Property | Value |
|---|---|
| Density: kg/dm3 | 8,0 |
| Hardness: HB 30 | 140-200 |
| polishable | yes |
| magnetizable | non |
| Temperature T °C/F (°C/F) | Specific heat J / kgK (Btu / lb °F) | Thermal conductivity W/mK (Btu·in / ft2·h·°F) | Electric resistance µΩ · cm (Ω circ mill / ft) | Modulus of elasticity kN/mm2 (103 ksi) | Expansion rate from 70°F bis T 10-6 / K (10-6 / °F) |
|---|---|---|---|---|---|
| 20 / 68 | 460 (--) | 12 (--) | 198 (--) | ||
| 100 / 212 | 186 (--) | 14,5 (--) | |||
| 200 / 392 | 177 (--) | 15,5 (--) | |||
| 300 / 572 | 170 (--) | 16,3 (--) | |||
| 400 / 752 | 165 (--) | 16,8 (--) | |||
| 500 / 932 | 158 (--) | 17,2 (--) |
| temperature | 0,2% Yieldstrength in high temperatures | 1,0% Yieldstrength in high temperatures |
|---|---|---|
| °C / °F | Rp0,2 | Rp1,0 | N/mm2/ksi | N/mm2/ksi |
| 100 / 212 | >=350 />=50,7 | >=400 / >=58 |
| 200 / 392 | >=270 / >=39,1 | >=310/ >=44,9 |
| 300 / 572 | >=240 />= 34,8 | >=270 />=39,1 |
| 400 / 752 | >=210 / >=30,4 | >=240/ >=34,8 |
| 500 / 932 | >=200 / >=29,0 | >=240 />= 34,8 |
| ksi value calculated | ||
Mechanical properties (20°C / 68°F)
| 0,2%Yield strength Rp0,2(N/mm2)/ksi | >=420 />=60,9 | <=160 mm | |
|---|---|---|---|
| 1%Yield strength Rp 1,0(N/mm2)/ki Yield strength ksi / (Mpa) | >= 460/>=66,7 60/ (415) | <=160 mm | ASTM A312 (S 34565) |
| Tensile strength Rm (N/mm2) Tensile strength ksi / (Mpa) | (800-950)/116-137,7 115/ (795) | <= 160mm | ASTM A312 (S 34565) |
| Elongation % | >=35 | <= 160mm | |
| impact work ISO-V (J) | >=100 | <= 160mm | |
| E-modul (Mpa) | 192000 | ||
Temparature information
| Application area | ||
|---|---|---|
| Operation temperature | ºF to 842 ºF | operating temperature limit |
| Solution heat treatment | ||
|---|---|---|
| Working temperature | 2048 ºF to 2138 ºF | |
| Explanation report | cooldown: air/water | |
| Solution heat treatment | ||
|---|---|---|
| Working temperature | 1742 ºF to 2192 ºF | |
| Explanation report | cool down: air | |
Standards / information
| Standards | Desciption |
|---|---|
| DIN EN 10088-1 (09/2005) | Stainless steels Part 1: List of stainless steels |
| DIN EN 10088-3 (09/2005) | stainless steels.Technical delivery conditions for semi-finished products,bars,rods,wire selection and bright products of corrosion resisting steels for general and construction purposes |
| SEW 400 (1997-02) | Rolled and forged stainless steels |
Process information
| Cold forming | cold form material in annealed state |
|---|
| Chip removing process | tendency to cold work hardening -low cutting rate -moderate feed speed -constant tool application |
|---|
| Welding | |
|---|---|
| - Material classification acc. CEN ISO/TR 15608 | 8.2 |
| - Type | gas fusion welding well weldable manual arc protective gas |
| - Add. material | 1.4466 |
| - Hints | pre-heat 302°F |
Main fields of application
| Details of application | mostly used in sea water plants, crude oil transportation and environmental technologies |
|---|---|
| Certifications | |
| Environmental technology | |
| Flue gas desulphurisation plants | |
| sea and lake water plants | Sea water desalination plant |
| Chemical Industry | chemischer Anlagenbau |
| Tunnelbau | |
| building industry | |
| offshore plants | Sea water desalination plant |
Range of products
| Product type | Product |
|---|---|
| Plates / Sheets | plates/sheets plate/sheet cuts |
| Fittings | welded elbows welded reductions Welded T-pieces seamless elbows seamless reductions seamless T-pieces |
| Pipes / Tubes | welded pipes/tubes seamless pipes/tubes |
| Bar steel | flat steel round bar steel |
Liability exclusion
All aforementioned specifications serve as a general orientation and have to be reviewed depending on the conditions of use.(c) 2012 M. Woite GmbH, Postbox, D-40671 Erkrath | Phone +49 (211) 24 40 91 - Fax +49 (211) 24 92 28 | www.m-woite.com - woite@woite-edelstahl.com