Laser welding
DIN | Alloy | UNS | AISI | AFNOR | B.S. | Registered work's label |
---|---|---|---|---|---|---|
1.4462 | S 31803 | AISI 316 LN | X2CrNiMoN 22-5-3 / NF EN 10088-5 (03/2009) (FR) | X2CrNiMoN 22-5-3 / B.S EN 10088-5 (03/2009) (GB) | *Cronifer® 2205 LCN Duplex Cr 22 (Spec) | |
1.4541 | S 32100 | AISI 321 | X6CrNiTi18-10 / NF EN10088-5 ( 03/2009) (FR) | X6CrNiTi18-10 / EN 10088-1 ( 06/2005) (GB) | ||
1.4571 | S 31635 | AISI 316 Ti | X6CrNiMoTi 17-12-2 / NF EN 10088-1 ( 06/2005) (FR) | X6CrNiMoTi 17-12-2 /B.S. EN 10088-1 ( 06/2005) (GB) | Cronifer 1810Ti | |
1.4828 | S 30900 | AISI 309 | Z 9 CNS 24.13 | 309 S - 24- EN 10088-1 (06/2005) (GB) | Thermax®4828 | |
1.4841 | S 31000 S 31400 | AISI 310 AISI 314 | X15CrNiSi 25-21 / EN 10088-1( 06/2005) (FR) | X15CrNiSi 25-21 / EN 10088-1( 06/2005) (GB) | Cronifer® 2520 |
- all methods of welding
- except gas welding
- manual electric welding
- Electrode
- Elktrode
- gas fusion welding
- well weldable
- well weldable with all techniques
- manual arc
- manual arc welding
- manual arc welding (E)
- MAG
- MAG cored wire
- MAG Massiv Draht
- MAG solid wire
- weld in solution annealed state
- MiG
- MIG/MAG
- plasma welding
- protective gas
- Welding wire
- difficult to weld
- welds very good
- bar electrode
- covered electrode
- submerged arc welding
- resistance welding
- WIG
- WIG electrode welding with hot wire addition
- WIG,
- WIG;UP;MAG-Draht,Lichtbogen Hand (E)-Zusatzwerkstoff: 1.4462
Liability exclusion
All aforementioned specifications serve as a general orientation and have to be reviewed depending on the conditions of use.(c) 2012 M. Woite GmbH, Postbox, D-40671 Erkrath | Phone +49 (211) 24 40 91 - Fax +49 (211) 24 92 28 | www.m-woite.com - woite@woite-edelstahl.com